Dell PowerConnect 5324 User Manual page 262

Ingress Filtering — Enables or disables Ingress filtering on the port. Ingress filtering discards
packets that are destined to VLANs of which the specific LAG is not a member.
Current Reserve VLAN — The VLAN currently designated by the system as the reserved VLAN.
Reserve VLAN for Internal Use — The VLAN selected by the user to be the reserved VLAN if not
in use by the system.
Assigning Port Settings
1
Open the VLAN Port Settings page.
2
Select the port to which settings need to be assigned from the Port drop-down menu.
3
Complete the remaining fields on the page
4
Click Apply Changes.
The VLAN port settings are defined, and the device is updated.
Displaying the VLAN Port Table
1
Open the VLAN Port Settings page.
2
Click Show All.
The VLAN Port Table opens.
Assigning Ports to VLAN Groups Using CLI Commands
The following table summarizes the equivalent CLI commands for assigning ports to VLAN
groups.
Table 7-67. VLAN Port CLI Commands
CLI Command
switchport mode {access | trunk
| general}
switchport trunk native vlan
vlan-id
switchport general pvid vlan-id
switchport general allowed vlan
add vlan-list [tagged |
untagged]
switchport general acceptable-
frame-types tagged-only
switchport general ingress-
filtering disable
262
Configuring Device Information
Description
Configures a port VLAN membership mode.
Defines the port as a member of the specified
VLAN, and the VLAN ID as the "port default
VLAN ID (PVID)".
Configure the Port VLAN ID (PVID) when the
interface is in general mode.
Adds or removes VLANs from a general port.
Discards untagged packets at ingress.
Disables port ingress filtering.