Dell PowerConnect 5324 User Manual page 319

Sample No. — The specific sample the information in the table reflects.
Drop Events — The number of dropped packets due to lack of network resources during the
sampling interval. This may not represent the exact number of dropped packets, but rather the
number of times dropped packets were detected.
Received Bytes (Octets) — The number of data octets, including bad packets, received on the
network.
Received Packets — The number of packets received during the sampling interval.
Broadcast Packets — The number of good broadcast packets received during the sampling interval.
Multicast Packets — The number of good Multicast packets received during the sampling interval.
CRC Align Errors — The number of packets received during the sampling session with a length of
64-1518 octets, a bad
bad FCS with a non-integral number.
Undersize Packets — The number of packets received less than 64 octets long during the sampling
session.
Oversize Packets — The number of packets received more than 1518 octets long during the
sampling session.
Fragments — The number of packets received less than 64 octets long and had a FCS during the
sampling session.
Jabbers — The number of packets received more than 1518 octets long and had a FCS during the
sampling session.
Collisions — Estimates the total number of packet collision that occurred during the sampling
session. Collision are detected when repeater ports detects two or more stations transmit
simultaneously.
Utilization — Estimates the main physical layer network usage on an interface during the session
sampling. The value is reflected in hundredths of a percent.
Viewing Statistics for a Specific History Entry
1
Open the RMON History Table.
2
Select an entry in the History Table No. field.
The entry statistics display in the RMON History Table.
Check Sequence (FCS), and with an integral number of octets, or a
319
Viewing Statistics