Dell PowerConnect 5324 User Manual page 211

Trap — Enables traps being sent when a packet is received on a locked port.
Trap Frequency (1-1000000) — The amount of time (in seconds) between traps. This field only
applies to Locked ports. The default value is 10 seconds.
Defining a Locked Port
1
Open the Port Security page.
2
Select an interface type and number.
3
Define the fields.
4
Click Apply Changes.
The locked port is added to the Port Security Table, and the device is updated.
Displaying the Locked Port Table
1
Open the Port Security page.
2
Click Show All.
The Port Security Table opens:
Locked Ports can also be defined from the Locked Ports Table, as well as the Port Security
page.
Configuring Device Information
211