Dell PowerConnect 5324 User Manual page 342

Interface — The specific port or LAG to configure:
Disable "Trust" Mode on Interface —
Set Default CoS For Incoming Traffic To — Sets the default CoS tag value untagged packets. The
CoS tag values are 0-7. The default value is 0.
Queue — The queue number.
Queue Mode — Indicates whether the queue is Strict Priority or WRR. This is defined in the
Queue Settings screen.
Weight (6-255) — Assigns WRR weights to queues. This field is enabled only for queues in WRR
queue mode.
% of WRR Bandwidth — The percentage translation of the weight defined in the Weight (6-255)
field.
Assigning QoS/CoS settings for an interface:
1
Open the Interface Cos/QoS Settings page.
2
Select an interface in the Interface field.
3
Define the fields.
4
Click Apply Changes.
The CoS settings are assigned to the interface.
342
Configuring Quality of Service