Dell PowerConnect 5324 User Manual page 303

Interface — Specifies whether statistics are displayed for a port or LAG.
Refresh Rate — Amount of time that passes before the interface statistics are refreshed.
Frame Check Sequence (FCS) Errors — Number of FCS errors received on the selected interface.
Single Collision Frames — Number of single collision frames received on the selected interface.
Multiple Collision Frames — Number of multiple collisions frames received on the selected
interface.
Single Quality Error (SQE) Test Errors — Number of SQE test errors received on the selected
interface.
Deferred Transmissions — Number of deferred transmissions on the selected interface.
Late Collisions —
Collisions — Number of excessive collisions received on the selected interface.
Internal MAC Transmit Errors — Number of internal MAC transmit errors on the selected
interface.
Carrier Sense Errors — Number of carrier sense errors on the selected interface.
Oversize Packets — Number of oversized packet errors on the selected interface.
Internal MAC Receive Errors — Number of internal MAC received errors on the selected
interface.
Single Quality Errors (SQE) Test Errors — The amount of SQE test errors received on the
selected interface.
Receive Pause Frames — Number of received paused frames on the selected interface.
Transmitted Paused Frames —
Displaying Etherlike Statistics for an Interface
1
Open the Etherlike Statistics page.
2
Select an interface in the Interface field.
The interface's Etherlike statistics are displayed.
Resetting Etherlike Statistics
1
Open the Etherlike Statistics page.
2
Click Reset All Counters.
The Ethernetlike statistics are reset.
Excessive
303
Viewing Statistics