Multiple Hosts Cli Commands - Dell PowerConnect 5324 User Manual

Table 7-50. Multiple Hosts CLI Commands
CLI Command
dot1x multiple-hosts
dot1x single-host-
violation {forward
|discard |discard-
shutdown}[trap
The following is an example of the CLI Command.
Neyland# configure
Neyland(config)# interface ethernet g1
Neyland(config-if)# dot1x multiple-hosts
206
Configuring Device Information
Description
Allows multiple hosts (clients) on an 802.1X-
authorized port that has the dot1x port-control
interface configuration command set to auto.
Configures the action to be taken when a station,
whose MAC address is not the client (supplicant)
MAC address, attempts to access the interface.
second s]