The Add an Event Entry page opens.
3
Complete the information in the dialog and click Apply Changes.
The Event Table entry is added, and the device is updated.
Modifying an RMON Event
1
Open the RMON Events Control page
2
Select an entry in the Event Table.
3
Modify the fields in the dialog and click Apply Changes.
The Event Table entry is modified, and the device is updated.
Deleting RMON Event Entries
1
Open the RMON Events Control page.
2
Click Show All.
The Events Table page opens.
3
Select Remove for the event(s) that need to be deleted and then click Apply Changes.
The selected table entry is deleted, and the device is updated.
NOTE:
Remove check box on that page.
Defining Device Events Using the CLI Commands
The following table summarizes the equivalent CLI commands for defining device events.
Table 8-87. Device Event Definition CLI Commands
CLI Command
rmon event index type [community
text] [description text] [owner
name]
show rmon events
322
Viewing Statistics
A single event entry can be removed from the RMON Events Control page by selecting the
Description
Configures RMON events.
Displays RMON event table.