Add Trap Receiver/Manager - Dell PowerConnect 5324 User Manual

SNMP traps are enabled on the device.
Enabling Authentication Traps on the Device
1
Open the SNMP Trap Settings page.
2
Select Enable in the Authentication Trap drop-down list.
3
Define the fields.
4
Click Apply Changes.
Authentication traps are enabled on the device.
Adding a New Trap Recipient:
1
Open the SNMP Trap Settings page.
2
Click Add.
The Add Trap Receiver/Manager page opens:
Figure 6-74. Add Trap Receiver/Manager
3
Define the fields. Configuring 0.0.0.0 means "All", and the traps are broadcast.
4
Click Apply Changes.
The Trap Recipient/Manager is added, and the device is updated.
Displaying the Trap Managers Table
The Trap Managers Table contains fields for configuring trap types.
1
Open SNMP Trap Settings page.
2
Click Show All.
The Trap Managers Table page opens:
Configuring System Information
183