Figure 7-81. Port Based Authentication Table
Termination Cause — The reason for which the port authentication was terminated.
Copy To Checkbox — Copies port parameters from one port to the selected ports.
Select All — Selects all ports in the Port Based Authentication Table.
Copying Parameters in the Port Based Authentication Table
1
Open the Port Based Authentication page.
2
Click Show All.
The Port Based Authentication Table opens.
3
Select the interface in the Copy Parameters from field.
4
Select an interface in the Port Based Authentication Table.
5
Select the Copy to check box to define the interfaces to which the Port based authentication
parameters are copied.
6
Click Apply Changes.
The parameters are copied to the selected port in the Port Based Authentication Table, and
the device is updated.
Configuring Device Information
201