Installing Usb Font Card - Dell 5330dn Service Manual

7.5.3 Installing USB Font Card

USB font cards can be used to permanently store additional Fonts and forms. This card can be used to
enable the printer to print barcodes and logos. Once the card is installed, the printer automatically detects the
additional fonts in the card.
Please contact Dell sales team in your region for the USB font card.
1. Remove the new USB Font Card from its
package, as shown in the following figure.
2. Power the printer off and unplug all cables from
the printer.
3. Grasp the control board cover and remove it.
Service Manual
Reference Information
4. Insert a USB Font Card into the outer USB slot
on the contol board.
CAUTION:
Do not insert a USB Font Card into the inner USB
memory slot. You could damage the control board
of the printer.
5. Close the control board cover by aligning the
groove on it with the notch on the printer and
sliding it.
6. Reconnect the power cord and printer cable, and
turn the printer on.
7-9