Error Messages - HP D5970A - NetServer - LCII Installation Manual

Chapter 12

Error Messages

If you get an error message, an error message utility on the Navigator CD-ROM
can help you find a possible solution.
When the HP NetServer displays an error message:
1. Insert your HP Navigator CD-ROM into the CD-ROM drive and press the
Reset button on the front of the HP NetServer.
2. The HP NetServer boots from the CD-ROM. The error message utility
automatically displays the error message and a problem-solving
procedure.
NOTE For a complete list of error messages and solutions see the HP
NetServer Information Assistant program on the HP Navigator
CD-ROM. HP Information Assistant runs on an HP Vectra or
other PC running Windows 3.1 and above, Windows 95 or
Windows NT.
3. Run the Event Log Report Utility.
114
Troubleshooting