Control Panel Lcd Screen And Navigation Buttons; Server Status Leds - HP D5970A - NetServer - LCII Installation Manual

Chapter 2

Control Panel LCD Screen and Navigation Buttons

The control panel features a two-line LCD screen that displays POST messages,
boot messages, and errors. You can also use this screen to display system
configuration information, a log of current and past error conditions, replaceable
parts information, and more.
Figure 2-3 shows the LCD and its navigation buttons. For instructions on using
this screen, see "Viewing Information on the Control Panel Display" later in this
chapter.
Escape
Enter
Figure 2-3. Control Panel Display Screen and Navigation Buttons

Server Status LEDs

Three LEDs -- one red, one yellow, and one green -- are grouped on the right
side of the control board. These three server status LEDs give you a quick idea of
the HP NetServer's general health. The signal it gives you reflects the most
critical pending event in the system.
Figure 2-4 shows the server status LEDs, and Table 2-2 tells how to interpret
them.
8
Not Scroll Up
Used One Line
Scroll Down
One Line
Controls, Indicators, and Ports
Two-Line
Display