HP D5970A - NetServer - LCII Installation Manual page 82

Chapter 7
13. Replace the lid of the processor cage. Insert the tabs on one end of the lid
into the matching slots on the rim of the cage. Then lower the lid into
place and fasten the captive screws. See Figure 7-8.
1. Insert tabs on lid
into slots on rim
of cage
Figure 7-8. Closing the Processor Cage Lid
14. Replace the cover of the chassis. See Chapter 3.
15. Reconnect the power cord and signal cables.
74
Installing Additional Processors
2. Lower lid and
fasten captive
screws