13 Alternative Rack Mounting
Introduction
This chapter tells how to mount the HP NetServer in an HP Systems rack. Figure
13-1 shows the Systems rack. If you have the newer HP System/E or System/U
racks, go to Chapter 8. If you are mounting the server in a non-HP rack, see the
documentation in the appropriate rack accessory kit.
a
b
c
Characteristics of
HP System Rack:
d
a. 3-Cornered Columns
b. Fan-Only Vent
c. "HP Systems" Name Plate
d. EIA Units Marked by Triangles
e. Anti-Tip Foot Extends
Out Front Only
e
Figure 13-1. HP System Rack
115