HP D5970A - NetServer - LCII Installation Manual page 11

Chapter 1
15. Configure the HP NetServer with Configuration Assistant from the
Navigator CD-ROM. Choose the Express Configuration option. Refer to
Chapter 10.
NOTE To fully configure the HP NetServer, all the rack components
should be cabled and online (though not necessarily installed
in the rack.)
16. If you plan to ship the fully-configured rack system to a different
destination, label each cable and component. Remove all components
from the rack, including external mass storage. Repack the components in
the original packing material, and label them for shipment.
CAUTION It is critical to disassemble and rebox all electronic
components before reshipment. Electronic components
(especially hard disk drives) can sustain damage when
shipped in rack enclosures.
Setting Up the HP NetServer LXr 8000
3