Setting Up The Hp Netserver Lxr 8000; Before You Set Up Your Hp Netserver; Setup Steps - HP D5970A - NetServer - LCII Installation Manual

1 Setting Up the HP NetServer
LXr 8000

Before You Set Up Your HP NetServer

Before you set up your HP NetServer LXr 8000:
Read the Rack Installation Road Map. The Road Map shows how to set
up the entire rack system. It will alert you to issues you must consider
before installing the HP NetServer itself. The Road Map comes with the
rack.
Read this chapter. This chapter tells how to set up and configure the HP
NetServer. It tells you what to do, and in what order. For a trouble-free
installation, read this chapter before taking the HP NetServer out of its
box.

Setup Steps

It is important that you follow the setup steps in the exact order shown below.
Skip any steps that do not apply to you.
1. Unpack the contents of the shipping box.
CAUTION The HP NetServer weighs approximately 130 pounds. At
least two people are required to lift the server. Failure to
observe this warning could result in serious injury, or damage
to the HP NetServer.
2. Verify the contents of the shipping box against the Contents Checklist
included with your HP NetServer. If anything is missing or damaged, call
your reseller.
3. Store the empty boxes and packing material in a safe place. This is
especially important if you plan to ship the HP NetServer elsewhere for
final installation.
1