HP D5970A - NetServer - LCII Installation Manual page 97

Chapter 8
5. Attach the bezel latch to the server with screws. See Figure 8-13.
6. Hold the bezel in front of the server. Line it up with the hinge and bezel
latch, and then press it firmly into place, especially at the top-left and
bottom-left corners. You should hear several clicks as the bezel fits into
place on the hinge and latch. See Figure 8-14.
Figure 8-13. Attaching the Bezel Latch
Mounting the Server in the Rack
89