HP D5970A - NetServer - LCII Installation Manual page 89

Chapter 8
Extend rack's
stablizing foot
from front of rack
for safety
Figure 8-5. Securing the Slide to the Rack Columns
3. With the slide pushed firmly into position, insert two screws through the
slide's front bracket into the left-front column. Fasten the screws only
loosely at first, so that the bracket can settle into the lowest possible
position. Then tighten the screws until they hold the bracket firmly to the
column.
4. Fasten the slide's rear bracket to the left-rear column. Follow the
procedure in Step 3.
5. Attach the other slide to the right-front and right-rear rack columns.
Repeat Steps 2-4.
Mounting the Server in the Rack
81