Displaying Pisa Platform Statistics - Cisco WS-SUP32-GE-3B - Supervisor Engine 32 Software Configuration Manual

Displaying PISA Platform Statistics

This example shows how to allocate the port ASIC capacity of port 3 to the PISA EtherChannel on a
WS-S32-10GE-PISA that is installed in slot 5:
Router# configure terminal
Router(config)# interface gigabitethernet 5/3
Router(config-if)# channel-group 256 mode on
Router(config-if)# end
This example shows how to allocate the port ASIC capacity of port 9 to the PISA EtherChannel on a
WS-S32-GE-PISA that is installed in slot 5:
Router# configure terminal
Router(config)# interface gigabitethernet 5/9
Router(config-if)# channel-group 256 mode on
Router(config-if)# end
Displaying PISA Platform Statistics
To display platform statistics for the Supervisor Engine 32 PISA, perform this task:
Command
Router# show platform pisa np counter-type counters
Table 4-1
Table 4-1
Counter-type
me num
acl
all
all pps
fpm
mqc
nbar
rx
tx
For examples of the show platform pisa np command output, see the Catalyst Supervisor Engine 32
PISA Cisco IOS Command Reference, Release 12.2ZY, at this URL:
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
4-4
shows the available counters.
PISA Platform Counters
Description
Microengine information
(valid num values are from 0 to 15)
ACL counter information
All Supervisor Engine 32 PISA-specific counters
Packets per second (pps) for all Supervisor Engine 32 PISA-specific counters
Flexible packet matching (FPM) counters
Modular QoS CLI information
Network-based application recognition (NBAR) counter information
Receive engine counters
Transmit engine counters
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2ZY/command/reference/cmdr
ef.html
Chapter 4
Purpose
Displays platform statistics for the
Supervisor Engine 32 PISA.
counter-type—See Table 4-1
•
Configuring a Supervisor Engine 32 PISA
for the list of valid values.
OL-11439-03