Mvpn Configuration With Default And Data Mdts - Cisco WS-SUP32-GE-3B - Supervisor Engine 32 Software Configuration Manual

Sample Configurations for MVPN
!
interface Loopback12
ip vrf forwarding mvpn-cus1
ip address 210.112.255.14 255.255.255.255
...
!
interface GigabitEthernet3/3
mtu 9216
ip vrf forwarding mvpn-cus3
ip address 172.10.14.1 255.255.255.0
ip pim sparse-dense-mode
!
...
!
interface GigabitEthernet3/19
ip vrf forwarding mvpn-cus2
ip address 192.16.4.1 255.255.255.0
ip pim sparse-dense-mode
ip igmp static-group 229.1.1.1
ip igmp static-group 229.1.1.2
ip igmp static-group 229.1.1.4
!
interface GigabitEthernet3/20
ip vrf forwarding mvpn-cus1
ip address 192.16.1.1 255.255.255.0
ip pim sparse-dense-mode
!
...

MVPN Configuration with Default and Data MDTs

The following sample configuration includes three MVRFs that have been configured for both default
and data MDTs. Only the configuration that is relevant to the MVPN configuration is shown.
...
!
ip vrf v1
rd 1:1
route-target export 1:1
route-target import 1:1
mdt default 226.1.1.1
mdt data 226.1.1.128 0.0.0.7 threshold 1
!
ip vrf v2
rd 2:2
route-target export 2:2
route-target import 2:2
mdt default 226.2.2.1
mdt data 226.2.2.128 0.0.0.7
!
ip vrf v3
rd 3:3
route-target export 3:3
route-target import 3:3
mdt default 226.3.3.1
mdt data 226.3.3.128 0.0.0.7
!
ip vrf v4
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
22-24
Chapter 22 Configuring IPv4 Multicast VPN Support
OL-11439-03