Cisco WS-SUP32-GE-3B - Supervisor Engine 32 Software Configuration Manual page 684

Software configuration guide
Hide thumbs Also See for WS-SUP32-GE-3B - Supervisor Engine 32:
Table of Contents

Advertisement

Configuring PFC QoS Statistics Data Export
Enabling PFC QoS Statistics Data Export for a Named Aggregate Policer
To enable PFC QoS statistics data export for a named aggregate policer, perform this task:
Command
Step 1
Router(config)# mls qos statistics-export
aggregate-policer aggregate_policer_name
Router(config)# no mls qos statistics-export
aggregate-policer aggregate_policer_name
Step 2
Router(config)# end
Step 3
Router# show mls qos statistics-export info
This example shows how to enable PFC QoS statistics data export for an aggregate policer named
aggr1M and verify the configuration:
Router# configure terminal
Router(config)# mls qos statistics-export aggregate-policer aggr1M
Router(config)# end
Router# show mls qos statistics-export info
QoS Statistics Data Export Status and Configuration information
---------------------------------------------------------------
Export Status : enabled
Export Interval : 300 seconds
Export Delimiter : |
Export Destination : Not configured
QoS Statistics Data Export is enabled on following ports:
---------------------------------------------------------
FastEthernet5/24
QoS Statistics Data export is enabled on following shared aggregate policers:
-----------------------------------------------------------------------------
aggr1M
Router#
When enabled for a named aggregate policer, PFC QoS statistics data export contains the following
fields, separated by the delimiter character:
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
40-4
Number of egress packets
Number of egress bytes
Time stamp
Export type ("3" for an aggregate policer)
Aggregate policer name
Direction ("in")
PFC3B slot number
Number of in-profile bytes
Number of bytes that exceed the CIR
Number of bytes that exceed the PIR
Time stamp
Chapter 40
Configuring PFC QoS Statistics Data Export
Purpose
Enables PFC QoS statistics data export for a named
aggregate policer.
Disables PFC QoS statistics data export for a named
aggregate policer.
Exits configuration mode.
Verifies the configuration.
OL-11439-03

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst supervisor engine 32 pisa

Table of Contents