Cisco WS-SUP32-GE-3B - Supervisor Engine 32 Software Configuration Manual page 49

Software configuration guide
Hide thumbs Also See for WS-SUP32-GE-3B - Supervisor Engine 32:
Table of Contents

Advertisement

Chapter 3
Configuring the Switch for the First Time
Is this interface in use?: yes
Configure IP on this interface?: yes
When you use the setup command, you see this display:
Configuring interface FastEthernet4/1:
Is this interface in use?[yes]: yes
Configure IP on this interface?[yes]: yes
Configuring the Global Parameters
When you first start the setup facility or enter the setup command, you are queried by the system to
configure the global parameters, which are used for controlling system-wide settings.
To boot the switch and enter the global parameters, follow these steps:
Step 1
Connect a console terminal to the console interface on the supervisor engine, and then boot the system
to the user EXEC prompt (
The following display appears after you boot the Catalyst 6500 series switch (depending on your
configuration, your display might not exactly match the example):
System Bootstrap, Version 6.1(2)
Copyright (c) 1994-2000 by cisco Systems, Inc.
c6k_sup2 processor with 131072 Kbytes of main memory
rommon 1 > boot disk0:c6sup22-jsv-mz.121-5c.EX.bin
Self decompressing the image : #################################################
################################################################################
################################################################################
################################################################################
################################################################################
[OK]
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco Internetwork Operating System Software
IOS (tm) c6sup2_sp Software (c6sup2_sp-SPV-M), Version 12.1(5c)EX, EARLY DEPLOYM
ENT RELEASE SOFTWARE (fc1)
Synced to mainline version: 12.1(5c)
TAC:Home:Software:Ios General:CiscoIOSRoadmap:12.1
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Wed 28-Mar-01 18:36 by hqluong
Image text-base: 0x30020980, data-base: 0x306B8000
Start as Primary processor
00:00:05: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging out
OL-11439-03
).
Router>
Restricted Rights Legend
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
Configuring the Switch
3-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst supervisor engine 32 pisa

Table of Contents