Displaying Vtp Statistics - Cisco WS-SUP32-GE-3B - Supervisor Engine 32 Software Configuration Manual

Configuring VTP
This example shows how to verify the configuration:
Router# show vtp status
VTP Version
Configuration Revision
Maximum VLANs supported locally : 1005
Number of existing VLANs
VTP Operating Mode
VTP Domain Name
VTP Pruning Mode
VTP V2 Mode
VTP Traps Generation
MD5 digest
Configuration last modified by 0.0.0.0 at 8-12-99 15:04:49
Router#

Displaying VTP Statistics

To display VTP statistics, including VTP advertisements sent and received and VTP errors, perform this
task:
Command
Router# show vtp counters
This example shows how to display VTP statistics:
Router# show vtp counters
VTP statistics:
Summary advertisements received
Subset advertisements received
Request advertisements received
Summary advertisements transmitted : 997
Subset advertisements transmitted
Request advertisements transmitted : 3
Number of config revision errors
Number of config digest errors
Number of V1 summary errors
VTP pruning statistics:
Trunk
---------------- ---------------- ---------------- ---------------------------
Fa5/8
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
11-10
: 2
: 247
: 33
: Transparent
: Lab_Network
: Enabled
: Disabled
: Disabled
: 0x45 0x52 0xB6 0xFD 0x63 0xC8 0x49 0x80
Purpose
Displays VTP statistics.
: 7
: 5
: 0
: 13
: 0
: 0
: 0
Join Transmitted Join Received
43071 42766
Chapter 11
Summary advts received from
non-pruning-capable device
5
Configuring VTP
OL-11439-03