Monitoring Private Vlans - Cisco WS-SUP32-GE-3B - Supervisor Engine 32 Software Configuration Manual

Chapter 13 Configuring Private VLANs

Monitoring Private VLANs

Table 13-1
Table 13-1
Command
show interfaces status
show vlan private-vlan
[type]
show interface switchport
show interface
private-vlan mapping
This is an example of the output from the show vlan private-vlan command:
Switch(config)# show vlan private-vlan
Primary Secondary Type
------- --------- ----------------- ------------------------------------------
10
10
10
OL-11439-03
shows the privileged EXEC commands for monitoring private VLAN activity.
Private VLAN Monitoring Commands
Purpose
Displays the status of interfaces, including the VLANs to which they
belong.
Displays the private VLAN information for the switch.
Displays private VLAN configuration on interfaces.
Displays information about the private VLAN mapping for VLAN SVIs.
501 isolated
502 community
503 non-operational
Catalyst Supervisor Engine 32 PISA Cisco IOS Software Configuration Guide, Release 12.2ZY
Ports
Fa2/1, Gi3/1, Gi3/2
Fa2/11, Gi3/1, Gi3/4
Monitoring Private VLANs
13-17