Monitoring Control Processor Blade (Cp8) Status - HP A7533A - Brocade 4Gb SAN Switch Base Hardware Reference Manual
Hp storageworks dc and dc04 san backbone director switches hardware reference guide (5697-7814, february 2009)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Administrator's manual (576 pages) ,
- User manual (248 pages) ,
- Release note (76 pages)
Table of Contents
Advertisement
LED
pur-
pose
Fast-flashing amber (on
1/2 second, then off 1/2
second)
Alternating green/amber
Monitoring Control Processor blade (CP8) status
To determine the status of a CP blade:
1.
Check the LED indicators on the CP blade (see
change during POST and other diagnostic tests. For information about how to interpret the LED
patterns, see
2.
Check port blade status by typing slotShow and haShow.
64
Monitoring DC SAN Director system components
Color
Transceiver or port is faulty.
Port is bypassed
Table
10.
Status
Change transceiver or reset switch
from workstation.
Reset port from workstation using the
portEnable or portCfgPersist-
entEnable command.
Figure
21). The LED patterns may temporarily
Recommended action
Advertisement
Table of Contents
