Control Processor Blade (Cp8) - HP A7990A - StorageWorks SAN Director 4/16 Blade Switch Hardware Reference Manual

Control Processor blade (CP8)

To determine the status of a CP blade:
1. Check the LED indicators on the CP blade (see
during POST and other diagnostic tests. For information about how to interpret the LED patterns, see
Table 9.
2. Check port blade status by typing slotShow and haShow.
Figure 21 identifies the CP8 blade.
Figure 21

Control Processor blade (CP8)

1 Status LED
2 Power LED
3 USB LED
4 USB port
1 2
3
4
5
6
7
8
26401a
Figure 21). The LED patterns may temporarily change
5 Console port (10101)
6 Ethernet port (MGMT)
7 Ethernet port (SERVICE)
8 Active CP LED
DC SAN Backbone Director hardware reference guide 55