Installing The Chassis Door; Replacing The Cable Management Comb; Removing A Cable Management Comb; Removing Or Replacing A Chassis Door - HP A7533A - Brocade 4Gb SAN Switch Base Hardware Reference Manual
Hp storageworks dc and dc04 san backbone director switches hardware reference guide (5697-7814, february 2009)
Hide thumbs
Also See for A7533A - Brocade 4Gb SAN Switch Base:
- Administrator's manual (576 pages) ,
- User manual (248 pages) ,
- Release note (76 pages)
Table of Contents
Advertisement
Installing the chassis door
To install the chassis door (see
1.
Align the holes in the door with the pins in the chassis
2.
Push the door into place.
Figure 26 Removing or replacing a chassis door
Replacing the cable management comb
The replacement procedure for the cable management comb takes less than five minutes. You will
need a #1 Phillips screwdriver.
Removing a cable management comb
CAUTION:
Wear a grounded ESD strap when handling DC SAN Director components. The Director chassis
provides a grounding connection above the power connectors. Also, store ESD-sensitive components
in antistatic packaging.
74
Replacing DC SAN Director field-replaceable units (FRUs)
Figure 26
on page 74):
26387a
Advertisement
Table of Contents
