Table 7-5. Stack Status Environments
Stack Status (This Switch)
Stack Status (All)
(for Back) to return to the Stacking Menu.
To display Stack Configuration menu for the switch you are moving, select
3. Stack Configuration
(for Edit) to select the Stack State parameter.
Use the Space bar to select Member, then press [v] to move to the Com-
mander MAC Address field.
Enter the MAC address of the destination Commander and press
Monitoring Stack Status
Using the stacking options in the menu interface for any switch in a stack, you
can view stacking data for that switch or for all stacks in the subnet (broadcast
domain). (If you are using VLANs in your stack environment, see "Stacking
Operation with a Tagged VLAN" on page 7-46.) This can help you in such ways
as determining the stacking configuration for individual switches, identifying
stack Members and Candidates, and determining the status of individual
switches in a stack. See table 7-5 on page 7-27.
• Commander's stacking
• Data on stack Members:
– Switch Number
– MAC Address
– System Name
– Device Type
Lists devices by stack name
or Candidate status (if device
is not a stack Member).
• Stack Name
• MAC Address
• System Name
• Member's stacking configuration
• Member Status
• Data identifying Member's
– Commander Status
– Commander IP Address
– Commander MAC Address
Same as for Commander.
ProCurve Stack Management
Configuring Stack Management
Same as for