Clip And Retainer Nut Locations On Cabinet Rails - HP A7533A - Brocade 4Gb SAN Switch Base Hardware Reference Manual

2. Install the mounting nuts in the cabinet rail locations shown in
10-32 screws that mount the port-side exhaust kit shelf and DC04 SAN Director to the cabinet.
• For rails with round holes—Install the clip nuts (F in
• For rails with square holes—Install the retainer nuts (G in
The location shown
anywhere in the cabinet that has 9U of space higher available.
132 DC04 SAN Director Installation
Figure 40 is an example. The shelf and DC04 SAN Director can be installed
Figure 40 Clip and retainer nut locations on cabinet rails
Figure 40. These nuts secure the
Figure 39).
Figure 39).