Configuring Mstp Switch Settings - Dell PowerConnect 7048P Manual

Configuring MSTP Switch Settings

Beginning in Privileged EXEC mode, use the following commands to
configure MSTP settings for the switch.
Command
configure
spanning-tree mst
configuration
string
name
version
revision
instance-id
instance
{add | remove} vlan
vlan-range
exit
spanning-tree mst
instance-id
priority
priority
CTRL + Z
show spanning-tree mst-
configuration
show spanning-tree
instance-id
instance
652
Configuring the Spanning Tree Protocol
Purpose
Enter global configuration mode.
Enable configuring an MST region by entering the
multiple spanning-tree (MST) mode.
Define the MST configuration name
Identify the MST configuration revision number.
Map VLANs to an MST instance.
instance-ID —
• ID of the MST instance. (Range: 1-4094)
vlan-range —
• VLANs to be added to the existing MST
instance. To specify a range of VLANs, use a hyphen. To
specify a series of VLANs, use a comma. (Range: 1-4093)
Return to global configuration mode.
Set the switch priority for the specified spanning-tree
instance.
instance-id —
• ID of the spanning-tree instance. (Range:
1-4094)
priority —
• Sets the switch priority for the specified
spanning-tree instance. This setting affects the likelihood
that the switch is selected as the root switch. A lower
value increases the probability that the switch is selected
as the root switch. (Range: 0-61440)
Exit to Privileged EXEC mode.
View multiple spanning tree configuration information.
View information about the specified MSTI.