Dell PowerConnect 7048P Manual page 338

Command
snmp-server user
username groupname
engineid-string
[remote
password
[{auth-md5
password
auth-sha
md5-key
auth-md5-key
sha-key
auth-sha-key
password
[priv-des
des-key
priv-des-key
exit
show snmp views
338
Configuring SNMP
Purpose
Configure a new SNMPv3 user.
username
•
]
that connects to the agent. (Range: 1-30 characters.)
|
groupname
•
|
the user belongs. (Range: 1-30 characters.)
|
}
engineid-string
•
|
SNMP entity to which the user belongs. The engine ID is
]]
a concatenated hexadecimal string. Each byte in the
hexadecimal character string is two hexadecimal digits.
The remote engine id designates the remote management
station, and should be defined to enable the device to
receive acknowledgements to "informs." (Range: 5-32
characters.)
• auth-md5 — The HMAC-MD5-96 authentication level.
• auth-sha — The HMAC-SHA-96 authentication level.
password
•
• auth-md5-key — The HMAC-MD5-96 authentication
level. Enter a pregenerated MD5 key.
• auth-sha-key — The HMAC-SHA-96 authentication
level. Enter a pregenerated SHA key.
md5-key
•
sha-key
• — Character string—length 48 characters.
• priv-des — The CBC-DES Symmetric Encryption
privacy level. Enter a password.
• priv-des-key — The CBC-DES Symmetric Encryption
privacy level. The user should enter a pregenerated MD5
or SHA key depending on the authentication level
selected.
des-key
• — The pregenerated DES encryption key. Length
is determined by authentication method selected—32
hex characters if MD5 Authentication is selected, 48 hex
characters if SHA Authentication is selected.
Exit to Privileged EXEC mode.
View SNMP view configuration information.
— Specifies the name of the user on the host
— Specifies the name of the group to which
— Specifies the engine ID of the remote
— A password. (Range: 1 to 32 characters.)
— Character string—length 32 hex characters.