Gvrp Parameters - Dell PowerConnect 7048P Manual

GVRP Parameters

Use the GVRP Parameters page to enable GVRP globally and configure the
port settings.
To display the GVRP Parameters page, click Switching → VLAN → GVRP
Parameters in the navigation panel.
Figure 21-15. GVRP Parameters
From the GVRP Parameters page, click Show All to see the GVRP
configuration for all ports. From this page, you can change the settings for
one or more entries.
NOTE:
Per-port and per-LAG GVRP Statistics are available from the
Statistics/RMON page. For more information, see "Monitoring Switch Traffic" on
page 391.
Configuring VLANs
593