Bind Ip Subnet To Vlan - Dell PowerConnect 7048P Manual

Powerconnect 7000 series stackable layer 2 and 3 switches

Hide thumbs Also See for PowerConnect 7048P:

Table of Contents

Figure 21-12. MAC-VLAN Bind Table

Bind IP Subnet to VLAN

Use the Bind IP Subnet to VLAN page to assign an IP Subnet to a VLAN.

The IP Subnet to VLAN configurations are shared across all ports of the

switch. There can be up to 64 entries configured in this table.

To display the Bind IP Subnet to VLAN page, click Switching → VLAN →

Bind IP Subnet to VLAN in the navigation panel.

Figure 21-13. Bind IP Subnet to VLAN

Configuring VLANs