Dell PowerConnect 7048P Manual page 185

myList. The switch will contact the RADIUS server to authenticate the
user. If that attempt fails, the switch queries the local user database for
relevant authentication information.
NOTE:
for these methods. For more information, see "Line Password" on page 194 or
"Enable Password" on page 194.
Figure 9-9. Configure Authentication Profile
5 Click Apply.
A profile is created. You can apply the newly created authentication profile
to an access method by using the System → Management Security →
Select Authentication page.
For example, you can select myList as the login authentication for anyone
who connects to the switch by using Telnet.
To use the LINE or ENABLE method, you must first define passwords
Controlling Management Access
185