Dell PowerConnect 7048P Manual page 976

Command
area-id
area virtual-link
router-id
[authentication
[message-digest | null]]
[[authentication-key
| [message-digest-key
id key
md5 ]]
area-id
area virtual-link
neighbor-id
retransmit-
seconds
interval
area-id
area virtual-link
neighbor-id
hello-interval
seconds
area-id
area virtual-link
neighbor-id
dead-interval
seconds
976
Configuring OSPF and OSPFv3
Purpose
Create the OSPF virtual interface for the specified area-
id and neighbor router.
Use the optional parameters to configure authentication
key
]
for the virtual link. If the area has not been previously
key-
created, it is created by this command. If the area already
exists, the virtual-link information is added or modified.
• authentication—Specifies authentication type.
• message-digest—Specifies that message-digest
authentication is used.
• null—No authentication is used. Overrides password or
message-digest authentication if configured for the
area.
• md5—Use MD5 Encryption for an OSPF Virtual Link
key
• —Authentication key for the specified interface.
(Range: 8 bytes or less if the authentication type is
simple and 16 bytes or less if the type is encrypt.)
key-id
• —Authentication key identifier for the
authentication type encrypt. (Range: 0-255)
Set the OSPF retransmit interval for the virtual link
interface.
seconds
The
between retransmitting LSAs if no acknowledgement is
received. (Range: 0–3600)
Set the OSPF hello interval for the virtual link.
seconds
The
wait before sending Hello packets from the virtual
interface. (Range: 1–65535).
Set the OSPF dead interval for the virtual link.
seconds
The
wait before the virtual interface is assumed to be dead.
(Range: 1–65535)
variable is the number of seconds to wait
variable indicates the number of seconds to
variable indicates the number of seconds to