Dell PowerConnect 7048P Manual page 229

2 Configure the secondary RADIUS server.
console(config)#radius-server host auth
10.27.65.104
console(Config-auth-radius)#name Dell-RADIUS
console(Config-auth-radius)#key test1234
console(Config-auth-radius)#exit
3 Configure the RADIUS accounting server.
console(config)#radius-server host acct
10.27.65.114
console(Config-acct-radius)#key test1234
console(Config-acct-radius)#name Dell-RADIUS-
Accounting
console(Config-acct-radius)#exit
4 Activate RADIUS accounting.
console(config)#aaa accounting network default
start-stop group radius
console(config)#exit
5 View the configured RADIUS servers.
console#show aaa servers
IP address
-------------- ----- ----- ------- ------- -------- -------
10.27.65.104
10.27.65.103
10.27.65.114
Global values
--------------------------------------------
Number of Configured Authentication Servers.... 2
Number of Configured Accounting Servers........ 1
Number of Named Authentication Server Groups... 1
Number of Named Accounting Server Groups....... 1
Number of Retransmits.......................... 3
Timeout Duration............................... 15
Deadtime....................................... 0
Source IP...................................... 0.0.0.0
RADIUS Accounting Mode......................... Enable
RADIUS Attribute 4 Mode........................ Disable
RADIUS Attribute 4 Value....................... 0.0.0.0
Type Port TimeOut Retran. DeadTime Src IP
Auth 1812 Global
Auth 1812 Global
Acct 1813 N/A
Global Global
Global Global
N/A N/A
Controlling Management Access
Prio.Usage
--- ----
Global 0 all
Global 0 all
N/A N/A N/A
229