Dell PowerConnect 7048P Manual page 561

Command
(Continued)
interface
interface
name
mac access-group
direction seqnum
CTRL + Z
Purpose
• vlan eq — VLAN number. (Range 0-4095)
• cos — Class of service. (Range 0-7)
• log — Specifies that this rule is to be logged.
time-range-name
•
associate with the ACL rule.
• assign-queue — Specifies particular hardware queue for
handling traffic that matches the rule.
queue-id
• — 0-6, where n is number of user configurable
queues available for that hardware platform.
interface
• mirror
to be copied to the specified interface.
interface
• redirect
matching this rule to be forwarded to the specified
interface.
(Optional) Enter interface configuration mode for the
specified interface. The
interface type and number, for example gigabitethernet
1/0/3.
You can also specify a range of interfaces with the interface
range command, for example, interface range
gigabitethernet 1/0/8-12 configures interfaces 8, 9, 10, 11,
and 12.
Bind the specified MAC ACL to an interface.
NOTE:
To apply this ACL to all interfaces, issue the command
in Global Configuration mode.
name
• — Access list name. (Range: Valid MAC access-list
name up to 31 characters in length)
direction
• — Direction of the ACL. (Range: In or out.
in
Default is .)
seqnum
• — Precedence for this interface and direction. A
lower sequence number has higher precedence. Range: 1
– 4294967295. Default is1.
Exit to Privileged EXEC mode.
Configuring Access Control Lists
— Specifies the named time range to
— Allows the traffic matching this rule
— This parameter allows the traffic
interface
variable includes the
561