From the Switching → VLAN → LAG Settings page, make sure Po1
a.
is selected.
Configure the following settings:
b.
•
Port VLAN Mode — General
•
PVID — 400
•
Frame Type — AdmitAll
Click Apply.
c.
Figure 21-28. LAG Settings
6 Configure port 1 as a trunk port.
From the Switching → VLAN → Port Settings page, make sure port
a
Gi1/0/1 is selected.
From the Port VLAN Mode field, select Trunk.
b
Click Apply.
c
620
Configuring VLANs