Dell PowerConnect 7048P Manual page 179

Table 9-2. Management Security Default Values (Continued)
Management Security
Feature
Authentication
Profiles
Local User Database
Line and Enable
passwords
TACACS+
RADIUS
Telnet
SSH
HTTP
HTTPS
DoS
Default
The following three Authentication Profiles are configured
by default:
• defaultList—Method is NONE, which means no
authentication is required.
• networkList—Method is LOCAL, which means the user
credentials are verified against the information in the local
user database.
• enableList—Method is NONE, which means no
authentication is required.
The methods can be changed, but the preconfigured profiles
cannot be deleted or renamed.
No users are defined
No passwords are configured.
No TACACS+ servers are defined.
No RADIUS servers are defined.
New Telnet sessions are allowed, and the default port is 23.
SSH access to the switch is disabled.
HTTP access to the switch is enabled.
HTTPS access to the switch is disabled.
DoS protection is disabled.
Controlling Management Access
179