Configuring Diffserv (Cli); Diffserv Configuration (Global); Diffserv Class Configuration For Ipv4 - Dell PowerConnect 7048P Manual

Configuring DiffServ (CLI)

This section provides information about the commands you use to configure
DiffServ settings on the switch. For more information about the commands,
PowerConnect 7000 Series CLI Reference Guide
see the

DiffServ Configuration (Global)

Beginning in Privileged Exec mode, use the following commands in to
configure the global DiffServ mode and view related settings.
CLI Command
configure
diffserv
exit
show diffserv

DiffServ Class Configuration for IPv4

Beginning in Privileged Exec mode, use the following commands to configure
DiffServ classes for IPv4 and view related information.
CLI Command
configure
class-map match-all
name
match any
match class-map
match cos
1100
Configuring Differentiated Services
Description
Enter global configuration mode.
Set the DiffServ operational mode to active.
Exit to Privileged EXEC mode.
Display the DiffServ general information, which
includes the current administrative mode setting as
well as the current and maximum number of
DiffServ components.
Description
Enter global configuration mode.
class-map-
Define a new DiffServ class and enter Class-Map
Configuration mode for the specified class.
NOTE:
class that has already been created, use the class-
class-map-name
map
Configure a match condition for all the packets.
Add to the specified class definition the set of
match conditions defined for another class.
Add to the specified class definition a match
condition for the Class of Service value.
To enter Class-Map Configuration mode for a
command.
.