Dot1Ag Mep Configuration - Dell PowerConnect 7048P Manual

Powerconnect 7000 series stackable layer 2 and 3 switches

Hide thumbs Also See for PowerConnect 7048P:

Table of Contents

To add an MA, click the Add link at the top of the page.

Dot1ag MEP Configuration

Use the MEP Configuration page to define switch ports as Management End

Points. MEPs are configured per domain and per VLAN.

To display the page, click Switching → Dot1ag → MEP Configuration in the

Figure 26-7. Dot1ag MEP Configuration

Configuring Connectivity Fault Management