Dell PowerConnect 7048P Manual page 1101

CLI Command
match destination-address mac Add to the specified class definition a match
match dstip
match dstl4port
match ethertype
match ip dscp
match ip precedence
match ip tos
match protocol
match secondary-cos
match secondary-vlan
match source-address mac
match srcip
Description
condition based on the destination MAC address of
a packet.
Add to the specified class definition a match
condition based on the destination IP address of a
packet.
Add to the specified class definition a match
condition based on the destination layer 4 port of a
packet using a single keyword, or a numeric
notation.
Add to the specified class definition a match
condition based on the value of the ethertype.
Add to the specified class definition a match
condition based on the value of the IP DiffServ
Code Point (DSCP) field in a packet.
Add to the specified class definition a match
condition based on the value of the IP.
Add to the specified class definition a match
condition based on the value of the IP TOS field in
a packet.
Add to the specified class definition a match
condition based on the value of the IP Protocol field
in a packet using a single keyword notation or a
numeric value notation.
Configure a match condition based on a secondary
COS value.
Configure a match condition based on a secondary
VLAN value.
Add to the specified class definition a match
condition based on the source MAC address of the
packet.
Add to the specified class definition a match
condition based on the source IP address of a
packet.
Configuring Differentiated Services
1101