Dell PowerConnect 7048P Manual page 573

Powerconnect 7000 series stackable layer 2 and 3 switches

Hide thumbs Also See for PowerConnect 7048P:

Table of Contents

Figure 21-1. Simple VLAN Topology

In this example, each port is manually configured so that the end station

attached to the port is a member of the VLAN configured for the port. The

VLAN membership for this network is port-based or static.

PowerConnect 7000 Series switches also support VLAN assignment based on

any of the following criteria:

MAC address of the end station

IP subnet of the end station

Protocol of the packet transmitted by the end station

Configuring VLANs

Show Quick Links

Table of Contents