Diffserv Policy Creation - Dell PowerConnect 7048P Manual

CLI Command
match protocol
match source-address mac
match srcip6
match srcl4port

DiffServ Policy Creation

Beginning in Privileged Exec mode, use the following commands to configure
DiffServ policies and view related information.
CLI Command
configure
policy-name
policy-map
exit
show policy-map
interface
show policy-map
Description
Add to the specified class definition a match
condition based on the value of the IP Protocol field
in a packet using a single keyword notation or a
numeric value notation.
Add to the specified class definition a match
condition based on the source MAC address of the
packet.
Add to the specified class definition a match
condition based on the source IPv6 address of a
packet.
Add to the specified class definition a match
condition based on the source layer 4 port of a
packet using a single keyword, a numeric notation,
or a numeric range notation.
Description
Enter global configuration mode.
in Create a new DiffServ policy for ingress traffic and
enter Policy Map Configuration mode for the policy.
Exit to Privilege Exec mode.
Displays all configuration information for the
specified policy.
in Displays policy-oriented statistics information for
the specified interface.
Configuring Differentiated Services
1103