Configuring The Expansion Slots - Dell PowerConnect 7048P Manual

Command
clock summer-time
date month
date {
month date year
}
hh:mm date month
{
month dat year
e}
hh:mm
[offset
acronym
[zone
CTRL + Z
show clock [detail]

Configuring the Expansion Slots

Beginning in Privileged EXEC mode, use the following commands to
configure and view information about the expansion slots and plug-in
modules (cards).
Command
configure
unit/slot cardindex
slot
CTRL + Z
show slot
show supported cardtype Display information about the plug-in modules the switch
304
Managing General System Settings
Purpose
Use this command if the summer time does not start and
| end every year according to a recurring pattern. You can
enter the month and then the date, or the date and then the
| month.
date
• — Day of the month. (Range: 1-31.)
offset
]
month
•
]
hh:mm
•
(Range: hh: 0–23, mm: 0–59)
offset
•
summertime. (Range:1–1440)
acronym
•
when summertime is in effect. (Range: Up to four
characters)
Exit to Privileged EXEC mode.
View information about the time. Include the detail
keyword to view information about the time zone and
summer time.
Purpose
Enter Global Configuration mode.
Configured the specified slot (1–2) to use the plug-in
module identified by the
view the CID associated with each plug-in module, use the
show supported cardtype command.
Exit to Privileged EXEC mode.
Display status information about the expansion slots.
supports.
— Month. (Range: The first three letters by name)
— Time in 24-hour format in hours and minutes.
— Number of minutes to add during the
— The acronym for the time zone to be displayed
cardindex
number (CID). To