Configuring Ospf And Ospfv3 - Dell PowerConnect 7048P Manual

Configuring OSPF and OSPFv3

This chapter describes how to configure Open Shortest Path First (OSPF)
and OSPFv3. OSPF is a dynamic routing protocol for IPv4 networks, and
OSPFv3 is used to route traffic in IPv6 networks. The protocols are
configured separately within the software, but their functionality is largely
similar for IPv4 and IPv6 networks.
NOTE:
In this chapter references to OSPF apply to OSPFv2 and OSPFv3 unless
otherwise noted.
The topics covered in this chapter include:
• OSPF Overview
• Default OSPF Values
• Configuring OSPF Features (Web)
• Configuring OSPFv3 Features (Web)
• Configuring OSPF Features (CLI)
• Configuring OSPFv3 Features (CLI)
• OSPF Configuration Examples
Configuring OSPF and OSPFv3
34
931