Dell PowerConnect 7048P Manual page 625

6. Configure the MAC-based VLAN information.
The following commands show how to associate a system with a MAC
address of 00:1C:23:55:E9:8B with VLAN 300. Repeat the vlan association
mac command to associate additional MAC addresses with VLAN 300.
console(config)#vlan database
console(config-vlan)#vlan association mac
00:1C:23:55:E9:8B 300
console(config-vlan)#exit
console(config)#exit
7. To save the configuration so that it persists across a system reset, use the
following command:
console#copy running-config startup-config
8. View the VLAN settings.
console#show vlan
VLAN Name
----- ---------
1 Default
200 Marketing
300 Sales
400 Payroll
9. View the VLAN membership information for a port.
console#show interfaces switchport gi1/0/1
Port: Gi1/0/1
VLAN Membership mode:Trunk Mode
Operating parameters:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: VLAN Only
Default Priority: 0
GVRP status:Disabled
Protected:Disabled
Ports
------------
Po1-48,
gi1/0/2-15,
gi1/0/21-24
te1/1/1-2
gi1/0/1,
gi1/0/16-20
gi1/0/1
gi1/0/1-15
Type Authorization
--------- -------------
Default Required
Static Required
Static Required
Static Required
Configuring VLANs
625