Default General System Information - Dell PowerConnect 7048P Manual

Powerconnect 7000 series stackable layer 2 and 3 switches

Hide thumbs Also See for PowerConnect 7048P:

Table of Contents

Default General System Information

By default, no system information or time information is configured, and the

SNTP client is disabled. The default SDM Template applied to the switch is

the Dual IPv4-IPv6 template.

The following table shows the default PoE Plus settings for the

PowerConnect 7024P and 7048P switches.

Table 11-5. PoE Plus Key Features (7024P and 7048P Only)

Global Usage Threshold

Per-Port Admin Status

Per-Port Power Prioritization

Per-Port Power Limit

Power Management Mode

Power Detection Mode

Powered Device (PD) Disconnection

Detection Mode

Enabled (globally, per-port priority is Low

802.3af Only

alternative-a

Managing General System Settings