Dell PowerConnect 7048P Manual page 416

Adding an Alarm Table Entry
To add an alarm:
1. Open the RMON Alarms page.
2. Click Add.
The Add an Alarm Entry page displays.
Figure 15-21. Add an Alarm Entry
3. Complete the fields on this page as needed. Use the help menu to learn
more information about the data required for each field.
4. Click Apply.
The RMON alarm is added, and the device is updated.
To view configured alarm entries, click the Show All tab. The Alarms Table
displays. From this page, you can remove configured alarms.
416
Monitoring Switch Traffic