Snmpv3 User Security Model (Usm) - Dell PowerConnect 7048P Manual

Figure 12-5. Add Access Control Group
3 Specify a name for the group.
4 Select a security model and level
5 Define the context prefix and the operation.
6 Click Apply to update the switch.
Click Show All to view information about existing access control
configurations.

SNMPv3 User Security Model (USM)

Use the User Security Model page to assign system users to SNMP groups
and to define the user authentication method.
NOTE:
You can also use the Local User Database page under Management
Security to configure SNMPv3 settings for users. For more information, see
"Local User Database" on page 192.
To display the User Security Model page, click System → SNMP → User
Security Model in the navigation panel.
Configuring SNMP
321